HB ARCHIVES: Honorbuddy Profile Pack--DO NOT DELETE!

Hi there

when i start "[Fly][A - Quest] LK 68-80 [Kick]" from kick it give me several errors and just fly's to dalaran. i only have this prob on one of my chars i createt and directly made it to lvl 90. atm im also leveling two other toons from 1-100 and there the profile just works fine.

i checked, the quests which this profile normal do are not done. so how i can force the profile or the bot to do the quests?

thanks for help.

View attachment 9212 2015-04-18 16.12.zip

 

hi
since yesterday lots of profiles are gone. like the whola mop and wod folders are gone. just classic and bc cata and goto are still available
i havent changed anything. pls help me

 

Uldum loop

I am in Uldum and was just finish with a quest so i stopped bot and logged off. I have triewd to restart and even reinstalled the bot but this has not fixed anything. But returned to SW and went to the Alliance calls boards and the continually tries to click a quest that inst there.

I can happily quest to get to a point where it will start again but just need to know where to get to. View attachment 2996 2015-04-18 20.21.txt View attachment 6160 2015-04-18 19.07.txt View attachment 2996 2015-04-18 20.21.txt View attachment 6160 2015-04-18 19.07.txt

 

The buddystore profiles are broken or taken down. Currently misssing mop and wod quest profiles.

 

Unless you include a log, posts like this will be ignored, as stated by ChinaJade a few posts back.

 

Hi, Zeed, and thanks for the log.

The quest is not available until level 92 (your Paladin is level 91.4). We do not understand why you are short the required experience. Let's try clearing your caches to make critical content was not skipped over:

Honorbuddy:HelpDesk:Cache corruption problems​

If no joy, then you may need to acquire level 92 through another means, perhaps DungeonBuddy. The Profile pack contains plenty of content that you should not be short of experience.

cheers,
chinajade


[size=-2]Ref: Zeed's original post w/log[/size]

 

Hi, Elso1488, and thanks for the log.

You are a level 100 trying to run level-inappropriate profiles. To make this work, you will need to

Honorbuddy
→ "Settings & Tools"
→ Turn on "Override Profile Settings"
→ Turn on "Ignore Checkpoints"​

This article has more information for you:

Honorbuddy:HelpDesk:Questing profiles and the Loremaster achievement​

cheers,
chinajade


[size=-2]Ref: Elso1488's original post w/log[/size]

 

Hi, Trovlov27, and welcome aboard.

The first thing we should do is clear your caches. This article will assist you with that:

Honorbuddy:HelpDesk:Cache corruption problems​

Your Deakhknight is level 85.6, and the Uldum profile is no longer level-appropriate for you. So, you have two choices:

• If you wish to finish out the Cataclysm profile set, you will need to alter your Honorbuddy settings as if you were going to pursue the Loremaster achievement. This article will help you with that:
  
  Honorbuddy:HelpDesk:Questing profiles and the Loremaster achievement​
  
  
• You can load the profile appropriate for your level, and move on.
  
  [A - Quest] 85-86 The Jade Forest [Kick].xml​

cheers,
chinajade


[size=-2]Ref: Trovlov27's original post w/log[/size]

 

ah hello guys i have a problem with this profile you see i only have in this profile the next leveling profiles , classic , BC, And cata.
But LK MoP and Wo D are missing they are not in the profile and my toon already reach lvl 70 and he still keep questin in BC
can anyone help me i don't understan why those profile for the other expansions are missing
thanks in advance.

 

"Can not turn in quest Drain Schematics (ID: 9731) because I don't have it in my quest log!
Bot stopping! Reason: Could not create current in quest bot!"

This is the Zangamash quest that I have completed. The bot kept checking for this. I'm sorry I have no log as I thought it was HB error, I deleted some stuff

 

Hi chinajade, will the profile automatically "switch" if the profiles are in those folders: Gyazo - a8e50a7d769ec31d324c9b90f17b239b.png?
In "Kicks 1" I have some profiles, in "Kicks 2" I have some too, etc.. etc..
I just wanna be sure before I can start .

For example, I ran a "12-58" profile in "Kicks 1". When I reach level 58, will it automatically run the "58-70" profile which is in "Kicks 2"?

 

Could not create current behavior in quest bot

Bot can't create quests? It gets stuck and will not complete the quest, log attached!

 

I think i found a broken QuestBehavior.

Profile:
Default Profiles\Questing Profile Pack\Classic\[H - Quest] 1-58 [Kick]\[H - Quest] 1-12 [Kick]\[H - Quest] Goblin 1-12 [Kick].xml
Line 643:

PHP:

<CustomBehavior File="SpecificQuests\14122-Kezan-TheGreatBankHeist" QuestId="14122" />

1 error isn't bothering. --- [_14122-vUnknown(warning) @line 643]: Attribute 'QuestId' is not recognized by this behavior--ignoring it. ---

what is bothering is, that the behavior isn't working at all.

what it should do:
interact with the bankvault thingy. works
wait for onscreen instructions and click actionbuttons as instructed on screen. doesn't work

onscreen instruction are shown, nothing happens. onscreen instructions time out.

i don't know. it is maybe cos i tried it with an hunter, and this "vehicle bar" seems to count as a pet.

here is the log: View attachment 5112 2015-04-22 19.11.txt

event starts at timestamp: [12:12:11.296 D] [QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.


edit:
ok, very strange behavior. i played around a little bit.
if i use Kick's original code, the CustomBehavior always stucks and does nothing as described. However, if i start the Behavior at another location, it works flawless.
Original:

HTML:

<If Condition="HasQuest(14122) &amp;&amp; !IsQuestCompleted(14122)" >
            <DisableBehavior Name="Pull" />
            <MoveTo X="-8373.546" Y="1727.475" Z="39.94706" />

            <CustomBehavior File="SpecificQuests\14122-Kezan-TheGreatBankHeist" QuestId="14122" />
            <CustomBehavior File="WaitTimer" WaitTime="3000"/>
            <CustomBehavior File="EjectVeh" />
        </If>

this one always stucks in the CB itself. not while running.

changed the point to fire the CB a little:

HTML:

        <If Condition="HasQuest(14122) &amp;&amp; !IsQuestCompleted(14122)" >
            <!-- <MoveTo X="-8367.326" Y="1727.402" Z="39.97735" /> -->
            <MoveTo X="-8358.773" Y="1727.31" Z="40.27073" />
            <DisableBehavior Name="Combat" />
            <While Condition="HasQuest(14122) &amp;&amp; !IsQuestCompleted(14122)" >
                <CustomBehavior File="SpecificQuests\14122-Kezan-TheGreatBankHeist" />
            </While>
            <EnableBehavior Name="Combat" />
            <CustomBehavior File="WaitTimer" WaitTime="3000"/>
            <CustomBehavior File="EjectVeh" />
        </If>

and it runs flawless.

 

Hi, Dylpan00,

No the profiles will not function if you break them up as you describe. All the profiles in the pack need to be unpacked into a single directory.

cheers,
chinajade

 

Hi, Gta809, and thanks for the log.

Your Honorbuddy is seriously mis-installed. You have installed it to the root of a hard disk. Honorbuddy must be in a folder to operate correctly. We need to get that corrected before we can even begin to look at problems in the other place.

Please re-install your Honorbuddy by following the instructions here:

Honorbuddy:HelpDesk:"Clean installing" Honorbuddy​

It is very important you place Honorbuddy in a folder, and not directly at the root of a drive.

cheers,
chinajade


[size=-2]Ref: Gta809's original post w/log[/size]

 

Hi, Cg1203im2, and thanks for the details and log.

Against this issue, we've opened:

HB-2291: TheGreatBankHeist: QB behaves erratically (possibly due to presence of pet bar)​

cheers,
chinajade


[size=-2]Ref: Cg1203im2's problem report w/log[/size]

 

Hi chinajade,
So it has to be like that and it will run automatically another, am I right : Gyazo - 2cb43824243b2d3d916462fc771152db.png ?

 

Hi, Dylpan00,

Yes, with the expected directory structure, the profiles should chain from one to the next automatically. There are always 'gotchas', for instance if you are level 100 and trying to run profiles for which you are over-level, there are other considerations. Similarly, if you've failed to acquire the necessary reputations in some instance because your experience boost was excessive (guild perks +heirlooms +RaF bonuses et al).

cheers,
chinajade

 

Error/Bug - Wont do anything for intro to wod

View attachment 87028 2015-04-22 16.44.txt

It loads and does goal = nothing thing, tried using singualer and doing fresh install, even tried the autoloader as well but did the same thing over and over again

 

"Can not turn in quest Drain Schematics (ID: 9731) because I don't have it in my quest log!
Bot stopping! Reason: Could not create current in quest bot!"

This is the Zangamash quest that I have completed. The bot kept checking for this. I'm sorry I have no log as I thought it was HB error, I deleted some stuff