[H] 96-98 Arak Questing

This! Appears to be a Singular setting and has nothing to do with the profile. I have not yet put the garrison abilities in any of the zones since only 2 zones really have use for it (Tally & Grand...NOT Arak)

 

v3.3 pushed, minor updates to vendors and a couple tweaks to order until I can get to the zone personally.

 

Great profile - running now will feedback.

Below is great troubleshooting advice too THANK YOU

 

Having an error on Line 59. Incorrect Entry ID. Shouldn't be coding so early into the morning

<Vendor Name="Nozwik Charbroil" Entry="Food" Type="Repair" X="-1575.559" Y="958.059" Z="10.61815" /> should be

<Vendor Name="Nozwik Charbroil" Entry="82568" Type="Repair" X="-1575.559" Y="958.059" Z="10.61815" />

 

XD ain't it tho...I saw that when I fired this up a little while ago, will push an update shortly

 

New Neighbors Quest also needs a blackspot at <Blackspot X="193.4517" Y="1862.687" Z="23.10341" Radius="8.545116" />
There's a pillar in the middle of the hunting ground spot that my druid keeps getting stuck on.

 

Added, will be in 3.4

 

This profile is SWEET! wors like a charm on my ele sham, used less then an hour from 96-97

 

Got this message

I can't figure out what it is referring to.

It worked really well up to this point.

 

EDIT:
[15:42:44.656 N] [Profile Message]: Quest Complete (35258): Legacy of the Apexis turning in to Darkscryer Raastok
[15:42:44.656 D] [QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
[15:42:44.690 N] Could not create current behavior in quest bot; exception was thrown

See v3.4 two posts down

 

Thanks. I'll do that.

Just so you know - I don't currently have that quest.

 

That was a mis-read on my part, you had already done that but:
<TurnIn QuestName="Hardly Working" QuestId="35260" TurnInName="Darkscryer Raastok" TurnInId="80157" X="390.1614" Y="2444.607" Z="19.77696" />
Was previously missing the XYZ, fixed below in a couple spots:

View attachment [H] 96-98 Arak Questing v3.4.xml

 

Thanks. That fixed it.

I'm wondering if I should move on to Nagrand. Do you happen to know if I would miss out on any significant quest rewards if I did that?

 

Other than gold, xp and an acheesement no, but just need to be 98 to start it.

 

Testing it now, Going to give a full report when done bugs etc.

Thanks !

 

So far ive ran into nothing but problems on a clean install of honorbuddy and a clean cache...bot not only runs through a huge amount of mobs until it dies..but when it finally does pull it tries to pull an entire area regardless of me changing it in the script...appreciate the effort though.

will post logs tonight when I get home.

 

Sounds like a PEBKAC issue, post logs

 

Do not attempt to run this profile AFK. It gets stuck inside the Inn in Spires of Arak, it runs into walls, it gets stuck at various quest givers, and it has some other pathing issues. It is a good and worthwhile profile because there is basically nothing else right now (12/15/2014) that will even travel through the zone doing the quests for Horde. Just be sure to watch what it is doing!

 

This should be understood by now, and should be understood with all Quest profiles.

Rather than detail the millions of mesh issues irrelevant to the profile, how about post the quests that are the problem so I can look at them:?

 

I have run through Arak on 3 (or is it 4? damn I should get outside more) toons, and have never seen any problems like what you describe. So its not the profile.

The only issues have been occasional niggly annoyances like not wanting to hand in quest 34886 Baby Bird to Ikky, even though the toon just 5min ago successfully handed in a different quest to the same NPC. I see absolutely zero difference in the structure of the quest hand-in code, but one works and another doesnt. WTF is with that, how is that even possible.

Only stoppage in hours though, Im happy


Edit: Now that I loaded my original version of Arak 4.3 and not the one I "customized" it now hands in to Ikky... Pebkac you reckon huh