• Visit Rebornbuddy
  • Creating Profiles

    Discussion in 'Rebornbuddy Guides' started by garretjax, Aug 11, 2014.

    1. garretjax

      garretjax New Member

      Joined:
      Mar 14, 2014
      Messages:
      56
      Likes Received:
      3
      Trophy Points:
      0
      Creating Profiles

      There are a couple of ways of creating your own profiles and I will try to cover some of the basics here.


      Reborn Profile Creator
      This is mainly used for creating a grind area or a gathering area
      1.You will need to choose the Profile Creator button in Rb
      [​IMG]

      Which will bring up
      [​IMG]

      2. Once here you will need to choose what type of path you will have.
      Waypoint: a collection of single nodes which your bot will travel to one at a time
      Mesh: which creates an entire collection of nodes in an area
      Regular mesh: will create a bunch of nodes in a path
      Mass Meshing: will create an entire area of nodes all around you
      3. Choose Create New or Load existing based upon what you want to do

      4. If you chose Mesh you will need to hit the Start Meshing button.
      Once you start moving your character you will see a bunch of nodes start populating on the radar screen.
      You will need to make a path/mesh around the mob/resource you wish to acquire.
      a. If you are creating a grind profile you will need to target each mob you wish to grind in your profile and select the Add Current Target button for each mob.
      b. If you are creating a gathering profile you will need to target the resource you wish to acquire and select Add Current Target.
      You will then need to add the item name you wish to acquire from the resource you selected. Must be exactly as item appears in gathering screen. Capitalization matters.
      After creating your path, choosing your mob/resource, adding in item to collect if gathering, its now time to save your newly created profile. Click the Save button.
      Naming your profile.
      It’s always good to include the X,Y coordinates from the in game map so you will know where to return to if you want to run the profile again.
      You may also want to include the zone you were in as well as what level mobs or resource you were gathering.

      OrderUp Profile Creator
      This is a plug in you will need to install in order to use the OrderUp profile creator

      OrderUp OrderBot profile generator by kagamihiiragi17 Here

      This Profile Creator in its current state is used for setting up grind areas. Please see OrderUp guide which can be found below the image.
      1-Activate Orderup in your Plugins console
      2-Press the OrderUp button
      3-You get the OrderUp Profile Creator
      [​IMG]



      ******There is an in depth OrderUp guide which can be found Here

      Creating your own Orderbot profile
      I am going to walk you through step by step of creating/modifying an Orderbot profile
      Here is the profile another member is using to collect Rosewood Logs
      [​IMG]
      1. Name your profile
      2. Go Here to get the file that contains all the map and aetheryte ids. You can either enter just the id's or copy and past the "If" statement
      3. Enter in your GatherObeject here such as "Mature Tree" or "Mineral Deposit"
      4. Enter your Hotspot info here. Hotspots can now be entered in format <HotSpot Radius="95" XYZ="-105.6673, 6.807602, 258.9359" />
      5. Enter the name of the item you wish to gather such as Rosewood Log in the above example
      6. This is where you will enter the Spell is any you wish to cast when gathering
      Save the profile and you are done
      If you dont know how to get your location there are a couple of ways of doing this.
      1.Go to plugins and start up the reborn console copy and paste this code: Log("{0} {1}",WorldManager.ZoneId,Core.Player.Location); then press Run Location will show at bottom

      [​IMG]

      or
      2. If you pull up the Reborn Profile Creator as shown in the first way how to create profiles under Player information it will show your X,Y,Z info for where ever your player is standing.

      Here is a blank Orderbot Starter Template for you to enter all of your information into
      View attachment Gathering Template.xml
       
      Last edited: Aug 12, 2014
      Exmortem likes this.
    2. Brosephines

      Brosephines New Member

      Joined:
      Jun 30, 2012
      Messages:
      23
      Likes Received:
      0
      Trophy Points:
      0
      Thanks for this. It will help out the newcomers quite a bit.
       
    3. Dgame

      Dgame Member

      Joined:
      Aug 19, 2014
      Messages:
      320
      Likes Received:
      0
      Trophy Points:
      16
      This is very helpful indeed and thank you. My question is, if I want to grind in different areas and need to teleport around, do I use both or just the orderbot?

      Also how do I set a limit on how much time spent or Items acquired or even nodes gathered at before I teleport to the next location?
       
      Last edited: Aug 20, 2014
    4. Toboco

      Toboco New Member

      Joined:
      Sep 26, 2014
      Messages:
      6
      Likes Received:
      0
      Trophy Points:
      0
      I have a question, how can i make a fishing bot?
      Im not really sure what i have to do to fish in a specific area. Can anyone help me?
       
    5. Dgame

      Dgame Member

      Joined:
      Aug 19, 2014
      Messages:
      320
      Likes Received:
      0
      Trophy Points:
      16
      Wish I could. That's something I want to learn too.
       
    6. Picasa

      Picasa Member

      Joined:
      Mar 16, 2013
      Messages:
      60
      Likes Received:
      1
      Trophy Points:
      8
      Very good tutorial, thanks you :)
       
    7. iguasto

      iguasto New Member

      Joined:
      Mar 11, 2013
      Messages:
      10
      Likes Received:
      0
      Trophy Points:
      0
      Anyway to add in tool equip on level for gathering in Orderbot? Was wondering if anyone new the command to check level then equip appropriate tool from inventory? example:

      <If Condition="Core.Player.ClassLevel &lt; 16">

      <Equiptool Name="Bronze Scythe" ToolId="3" /> /* This is an example */

      </If>

      Thanks!
       
    8. kagamihiiragi17

      kagamihiiragi17 Community Developer

      Joined:
      Jun 24, 2014
      Messages:
      873
      Likes Received:
      24
      Trophy Points:
      0
      Not right now. This is certainly a feature I'm sure is being looked into, however.
       
    9. Tinytox

      Tinytox Member

      Joined:
      Nov 5, 2014
      Messages:
      370
      Likes Received:
      7
      Trophy Points:
      18
      I was digging around for anything I could find-- Not having much luck with it because I don't know jack. :p

      There's one thing I'd love to know- And that's how to detect for buffs (such as Stealth) and apply them if they're down. Is this possible ATM via an OrderBot script?
      It's not really a GatheringSkill, of course, because those are for use while you have a node open. :/
       
    10. kaihaider

      kaihaider Community Developer

      Joined:
      May 18, 2010
      Messages:
      1,325
      Likes Received:
      5
      Trophy Points:
      38
      you could run a codeblock that casts stealth if you don't have it
       
    11. bak2bot

      bak2bot New Member

      Joined:
      Dec 5, 2014
      Messages:
      4
      Likes Received:
      0
      Trophy Points:
      1
      I know this is probably staring me in the face but how do I best determine the HotSpot Radius? Example I want to do Mature trees in Hawthorne Hut and not the Lush Vegetation.

      -Edit If you click on the profile creator the HotSpot is conveniently listed in Player information. :) Thanks Buddies!
       
      Last edited: Dec 12, 2014
    12. Lordsolarius

      Lordsolarius New Member

      Joined:
      Jan 8, 2015
      Messages:
      13
      Likes Received:
      0
      Trophy Points:
      0
      I am sure that this is probably and asked and answered question, but I was wondering how I can make a profile that will just kill mobs in a certain area. For instance, if I want to run some slightly monitored spiritbonding grinding on snurbles or something?

      Thanks
       
    13. wilderg99

      wilderg99 New Member

      Joined:
      May 31, 2014
      Messages:
      245
      Likes Received:
      0
      Trophy Points:
      0
      what happens if i die? does it just run back to the spot? do i need to create a ruturn profile or something?
       
    14. Ksexasiaris

      Ksexasiaris Member

      Joined:
      Nov 10, 2014
      Messages:
      183
      Likes Received:
      3
      Trophy Points:
      18
      I do everything step by step, but the character stay still and do nothing..I get the error [14:48:56.589 D] No viable path from <-137.4538, -0.4214565, 362.0119> to <-2006096, 7614766, 3850719> in 00:00:00.6631590 ms. This is the profile I made to gather Flax with Botany
       

      Attached Files:

    15. kagepande

      kagepande Community Developer

      Joined:
      Oct 20, 2014
      Messages:
      289
      Likes Received:
      11
      Trophy Points:
      18
      Code:
      <Hotspot Radius="80" X="-200,6096" Y="0,7614766" Z="385,0719"  />
      <Hotspot Radius="80" X="-137,4538" Y="-0,4214565" Z="362,0119"  />
      
      That right here is your issue, all of your "," commas need to be "." periods since it is decimals places and not one large number, so its throwing the error that it cant find location because it doesn't exsit.

      Use this instead
      Code:
      <Hotspot Radius="80" X="-200.6096" Y="0.7614766" Z="385.0719"  />
      <Hotspot Radius="80" X="-137.4538" Y="-0.4214565" Z="362.0119"  />
      
       
      Ksexasiaris likes this.
    16. Ksexasiaris

      Ksexasiaris Member

      Joined:
      Nov 10, 2014
      Messages:
      183
      Likes Received:
      3
      Trophy Points:
      18
      Thank you very much. That was the problem and is working very good now :)
       
    17. insanepoet

      insanepoet New Member

      Joined:
      Feb 12, 2015
      Messages:
      28
      Likes Received:
      1
      Trophy Points:
      3
      Here is a mob farming profile for snurble tufts:

      View attachment Snurble_Tufts.xml

      ... I Really need to finish the svn and get my collection up maybe that will give me the motivation to finish the rest of the profiles i have yet to complete...
       
    18. CattyMCcat

      CattyMCcat New Member

      Joined:
      Apr 17, 2015
      Messages:
      6
      Likes Received:
      0
      Trophy Points:
      0
      Is it possible for someone to make a little more detailed "Step by Step" guide for complete newcomers?

      I have been trying different thing for a couple of hours now to get a profile up for gathering hippogryph skins and i keep running into different problems

      My latest one is: How do i get the mob id? - <TargetMob id="271"/> is the one from snurble above but how do i find that number?

      I have tried using OrderUp

      I have tried "Create profile" - But that seems a bit to confusing for me

      And right now i am editing files to make my own - I think i am doing everything right here only need to know where to find the ID's for mobs
       
    19. WoWuser123

      WoWuser123 Member

      Joined:
      Aug 4, 2011
      Messages:
      371
      Likes Received:
      4
      Trophy Points:
      18
      You find the mob on Final Fantasy XIV : A Realm Reborn (FFXIV ARR) Database, the mob ID can be found in the adress bar of your browser.

      For a 'hippogryph' it's Hippogryph - Monster - Final Fantasy XIV : A Realm Reborn (FFXIV ARR) Database , where '789' is the mob ID.
       
    20. TahitiBuddy

      TahitiBuddy New Member

      Joined:
      Mar 11, 2015
      Messages:
      1
      Likes Received:
      0
      Trophy Points:
      0
      Nice tutorial but i'm looking for something like , talk to a npc repair your gear or talk to a npc and take a quest of him and then grind monster do u know how can i make a profile like that? it doesn't seems like there's a profile creator for that or maybe i havent found it.
       

    Share This Page