• Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • HB ARCHIVES: Honorbuddy Profile Pack--DO NOT DELETE!

    Discussion in 'Archives' started by chinajade, Sep 8, 2013.

    1. chinajade

      chinajade Well-Known Member Moderator Buddy Core Dev

      Joined:
      Jul 20, 2010
      Messages:
      17,540
      Likes Received:
      172
      Trophy Points:
      63
      Hi, Proceed,

      The profiles will auto-chain from one to the next until all the profiles are complete. You can read more about this in Where Do I Start?.

      cheers,
      chinajade
       
    2. chinajade

      chinajade Well-Known Member Moderator Buddy Core Dev

      Joined:
      Jul 20, 2010
      Messages:
      17,540
      Likes Received:
      172
      Trophy Points:
      63
      Hi again, Wullie!

      v2744 has folded in your changes. I've also removed the issue from the Known Issues list at your confirmation of fix.


      Sadly, the Developer Tools dialog is subject to the same constraints as the compiler. If the method is protected or private, the Developer Tools does not have access to it either.

      cheers & thanks for knocking out another!
      chinajade


      [size=-2]Ref: Yet another Wullie quest fix![/size]
       
    3. chinajade

      chinajade Well-Known Member Moderator Buddy Core Dev

      Joined:
      Jul 20, 2010
      Messages:
      17,540
      Likes Received:
      172
      Trophy Points:
      63
      Hi, Luvs2spludge, and thank you for the log,

      Until we get that other problem repaired, there is simply no point in chasing this. Trying to debug a damaged install is simply a waste of time. We need to get the primary problem repaired first.

      I responded to your post in the Support forum. Hopefully, with more eyes on the issue, someone will figure it out. Both CodenameG and Tony are much better than I am at diagnosing issues like this. At worst case, they may need to have you use the Honorbuddy Service.

      cheers,
      chinajade


      [size=-2]Ref: Loves2spludge's original post w/log[/size]
       
    4. chinajade

      chinajade Well-Known Member Moderator Buddy Core Dev

      Joined:
      Jul 20, 2010
      Messages:
      17,540
      Likes Received:
      172
      Trophy Points:
      63
      Wullie, thank you for the confirmation!

      The item has been removed from the Known Issues list. In v2745 of the profile, I've also added a maintainer's note that quest options change based on order of quest turnin. So, hopefully future maintainers won't make that same mistake.

      cheers,
      chinajade


      [size=-2]Ref: Wullie's confirmation of repair[/size]
       
    5. chinajade

      chinajade Well-Known Member Moderator Buddy Core Dev

      Joined:
      Jul 20, 2010
      Messages:
      17,540
      Likes Received:
      172
      Trophy Points:
      63
      Hi, Paintgod93,

      Thank you for the kind words. We are always looking for ways to improve.

      cheers,
      chinajade
       
    6. chinajade

      chinajade Well-Known Member Moderator Buddy Core Dev

      Joined:
      Jul 20, 2010
      Messages:
      17,540
      Likes Received:
      172
      Trophy Points:
      63
      Hi, Wullie,

      I believe you are correct. In v2747, I've increased the radius of the "Tower By Grainery" blackspot back to 20 (from 10). And the IgnoreMobsInBlackspots arguments have been flipped to "false". (The value of "true" is the default, and the attribute should've never been in the invocation if that was the true intent).

      Thinking it through, I believe this to be correct. If you disagree please let me know. I'm going to leave the issue on the Known Issues list until we can confirm it.

      cheers,
      chinajade



      [size=-2]Ref: Wullie's bug report[/size]
       
    7. HB2807Z57

      HB2807Z57 New Member

      Joined:
      May 5, 2011
      Messages:
      16
      Likes Received:
      0
      Trophy Points:
      1
      Hi

      First of all a great bot. Makes playing more fun for me. But I have som issues in Hellfire Peninsula. Im playing a alliance Death Kight and the bot seems to have som problems with finding a correct path to quest and many times the bot will not fly to that location, instead it will walk.

      It seems that it cant find it's way properly from Honor Hold i Hellfire.

      Im attaching two log files, one from yesterday and one from this morning.

      I hope I have put enough iformation for you to adress this.

      Best regards
      //Andreas
       

      Attached Files:

    8. chinajade

      chinajade Well-Known Member Moderator Buddy Core Dev

      Joined:
      Jul 20, 2010
      Messages:
      17,540
      Likes Received:
      172
      Trophy Points:
      63
      <waves at Wullie>,

      v2748 has captured your corrections to the profile pack. I've also included the issue on Known Bugs List: MoP 85-90 with an indication that confirmation is all that is required.

      Thanks again!
      chinajade


      [size=-2]Ref: Wullie's quest fix[/size]
       
    9. chinajade

      chinajade Well-Known Member Moderator Buddy Core Dev

      Joined:
      Jul 20, 2010
      Messages:
      17,540
      Likes Received:
      172
      Trophy Points:
      63
      Hi, Ehnoah,

      Yes, we intend to repair issues like this, but they are not high priority. Our priority at the moment is to get the profiles working smoothly in the new WoW 5.4 gameworld.

      As stated in the message, those are just warnings, and the old behaviors should continue to work just fine. Old, and redundant behaviors are being deprecated as aggressively as we can. This makes it difficult for profiles to 'keep up' at times, but things will eventually settle out.

      cheers,
      chinajade
       
    10. chinajade

      chinajade Well-Known Member Moderator Buddy Core Dev

      Joined:
      Jul 20, 2010
      Messages:
      17,540
      Likes Received:
      172
      Trophy Points:
      63
      Hi, HB2807Z57, and thanks for the logs.

      What you are reporting is not errors with the profile. You should make a post into the Support forum regarding these issues. But before going there, we'll try to help you get fixed up.

      [07:04:18.269 D] MountName: Armored Snowy Gryphon
      [07:04:18.269 D] FlyingMountName: Armored Snowy Gryphon

      Your MountName should be a bona-fide "ground only" mount--not a flying mount.

      A flying mount as MountName will cause pathing issues, or back-and-forth motion when Honorbuddy is navigating.

      In your first log, we see this:
      [07:22:04.226 D] Could not generate path from {-852.9789, 2894.301, 103.3989} to {-1104.507, 3242.45, 67.1872} (time used: 0 milliseconds) @ FindStartPoly

      This may be related to the mount issue. If not, you should be able to find your help in this article:

      In your second log, it looked like the bot was stopped right after Honorbuddy took 12 seconds to calculate a path, and was about to start moving. Destinations that are distant can take a few second to calculate.

      If this doesn't get you fixed up, please make a post to the Support forum, and show them a fresh log with your current issue.

      As to your question about using 'ground travel' instead of 'flying'...
      Not all the profile in the pack have been converted to use flying yet. Currently, you won't start flying until the end of the Hellfire Peninsula profile.

      cheers & happy botting,
      chinajade



      [size=-2]Ref: HB2807Z57's original post w/log[/size]
       
    11. Ehnoah

      Ehnoah Member

      Joined:
      Jan 15, 2010
      Messages:
      282
      Likes Received:
      3
      Trophy Points:
      18
      I level right now up to 90 from Level 1.

      So I am not sure I am right now in redrige Mountains and if he is Indoor It spams my Log:

      Is this a bug or intended? If it is a bug I report it.

      He also move very often trough walls / doors etc. It all looked like he is 1 Meter to far away from "normal" way.



      Code:
      
      
      
      [12:18:22.946 N] Moving to Type: QuestTurnIn
      [12:18:23.053 D] [Singular-DEBUG] DruidMoveBuff: poitype=QuestTurnIn poidist=49.3 indoors=Y canmount=N riding=0
      [12:18:23.096 N] Moving to Type: QuestTurnIn
      [12:18:23.222 D] [Singular-DEBUG] DruidMoveBuff: poitype=QuestTurnIn poidist=49.4 indoors=Y canmount=N riding=0
      [12:18:23.263 N] Moving to Type: QuestTurnIn
      [12:18:23.369 D] [Singular-DEBUG] DruidMoveBuff: poitype=QuestTurnIn poidist=49.8 indoors=Y canmount=N riding=0
      [12:18:23.413 N] Moving to Type: QuestTurnIn
      [12:18:23.510 D] [Singular-DEBUG] DruidMoveBuff: poitype=QuestTurnIn poidist=50.2 indoors=Y canmount=N riding=0
      [12:18:23.552 N] Moving to Type: QuestTurnIn
      [12:18:23.648 D] [Singular-DEBUG] DruidMoveBuff: poitype=QuestTurnIn poidist=50.7 indoors=Y canmount=N riding=0
      [12:18:23.689 N] Moving to Type: QuestTurnIn
      [12:18:23.790 D] [Singular-DEBUG] DruidMoveBuff: poitype=QuestTurnIn poidist=51.6 indoors=Y canmount=N riding=0
      [12:18:23.833 N] Moving to Type: QuestTurnIn
      [12:18:23.934 D] [Singular-DEBUG] DruidMoveBuff: poitype=QuestTurnIn poidist=53.0 indoors=Y canmount=N riding=0
      [12:18:23.976 N] Moving to Type: QuestTurnIn
      [12:18:24.079 D] [Singular-DEBUG] DruidMoveBuff: poitype=QuestTurnIn poidist=54.3 indoors=Y canmount=N riding=0
      [12:18:24.122 N] Moving to Type: QuestTurnIn
      [12:18:24.224 D] [Singular-DEBUG] DruidMoveBuff: poitype=QuestTurnIn poidist=55.5 indoors=Y canmount=N riding=0
      [12:18:24.266 N] Moving to Type: QuestTurnIn
      [12:18:24.374 D] [Singular-DEBUG] DruidMoveBuff: poitype=QuestTurnIn poidist=56.8 indoors=Y canmount=N riding=0
      [12:18:24.417 N] Moving to Type: QuestTurnIn
      [12:18:24.516 D] [Singular-DEBUG] DruidMoveBuff: poitype=QuestTurnIn poidist=58.2 indoors=Y canmount=N riding=0
      [12:18:24.558 N] Moving to Type: QuestTurnIn
      [12:18:24.657 D] [Singular-DEBUG] DruidMoveBuff: poitype=QuestTurnIn poidist=59.5 indoors=Y canmount=N riding=0
      [12:18:24.698 N] Moving to Type: QuestTurnIn
      [12:18:24.799 D] [Singular-DEBUG] DruidMoveBuff: poitype=QuestTurnIn poidist=60.7 indoors=Y canmount=N riding=0
      [12:18:24.843 N] Moving to Type: QuestTurnIn
      [12:18:25.090 D] [Singular-DEBUG] DruidMoveBuff: poitype=QuestTurnIn poidist=63.1 indoors=Y canmount=N riding=0
      [12:18:25.173 N] Moving to Type: QuestTurnIn
      [12:18:25.345 D] [Singular-DEBUG] DruidMoveBuff: poitype=QuestTurnIn poidist=65.4 indoors=Y canmount=N riding=0
      [12:18:25.427 N] Moving to Type: QuestTurnIn
      [12:18:25.598 D] [Singular-DEBUG] DruidMoveBuff: poitype=QuestTurnIn poidist=67.7 indoors=Y canmount=N riding=0
      [12:18:25.685 N] Moving to Type: QuestTurnIn
      [12:18:25.881 D] [Singular-DEBUG] DruidMoveBuff: poitype=QuestTurnIn poidist=69.6 indoors=Y canmount=N riding=0
      [12:18:25.994 N] Moving to Type: QuestTurnIn
       
    12. chinajade

      chinajade Well-Known Member Moderator Buddy Core Dev

      Joined:
      Jul 20, 2010
      Messages:
      17,540
      Likes Received:
      172
      Trophy Points:
      63
      Hi, Ehnoah,

      This doesn't look like a profile issue. Please see if this article will help you resolve the problem:

      If that doesn't resolve the issue, please follow our guide for Reporting Problems or Seeking Assistance.

      cheers,
      chinajade
       
    13. matthieu926

      matthieu926 New Member

      Joined:
      Dec 4, 2012
      Messages:
      1
      Likes Received:
      0
      Trophy Points:
      0
      After installing the kick's profiles I can't find the Questing profile in the folder, did they remove it or so ?
       
    14. chinajade

      chinajade Well-Known Member Moderator Buddy Core Dev

      Joined:
      Jul 20, 2010
      Messages:
      17,540
      Likes Received:
      172
      Trophy Points:
      63
      Hi, Mathieu926,

      This is answered in our first posts. Of interest to you will be Where Do I Start?.

      cheers,
      chinajade
       
    15. stevendesignz

      stevendesignz New Member

      Joined:
      Apr 22, 2012
      Messages:
      14
      Likes Received:
      0
      Trophy Points:
      0

      :D sorry if im being retarded, but just getting this now :S
       
    16. Wullie

      Wullie New Member

      Joined:
      Jun 8, 2013
      Messages:
      411
      Likes Received:
      3
      Trophy Points:
      0
      Sound like you've perhaps got a corrupted install.

      I would recommend installing fresh to a new directory (eg don't just install over the top of existing files as that looks like the issue perhaps)
       
    17. Wullie

      Wullie New Member

      Joined:
      Jun 8, 2013
      Messages:
      411
      Likes Received:
      3
      Trophy Points:
      0
      Questing in Krasarang Wilds. Level 88 Horde.

      Quest: Finding Yi-Mo - Quest - World of Warcraft

      Issue: This is just a minor one, but since it would cause the bot to "stop" and require intervention I thought I'd report and see if we can get it fixed. It seems that the bot has to travel to this NPC then speak to it initially which alters the state to the point that it can speak to it again and the complete the quest.
      The bot was stuck with the initial dialog to the NPC open, and would proceed no further. Left it for a good 10 minutes I'd say.
      The NPC was showing with a yellow "?" quest complete symbol, and merely manually closing the open dialog cause the bot to interact with the NPC and then complete the quest. This is why, on this occasion I'm not submitting a fix since I wasn't able to test :(

      This is the section it seemed stuck in:
      (Line 862)

      Code:
      			<While Condition="((HasQuest(30080)) &amp;&amp; (!IsQuestCompleted(30080)))" >
      				<CustomBehavior File="InteractWith" QuestId="30080" MobId="58376" CollectionDistance="1000" X="-324.2101" Y="-863.3698" Z="120.1054" />
      			</While>
      		<TurnIn QuestName="Finding Yi-Mo" QuestId="30080" TurnInName="Yi-Mo Longbrow" TurnInId="58376" X="-324.2101" Y="-863.3698" Z="120.1054" />
      
      In my log you'll see around 5001 this I think is where it's stopped doing nothing for what looks around 12 minutes.

      View attachment 4300 2013-09-22 14.09.txt

      Specifically

      Code:
      [Ref: "[N - Quest] 87-87.5 Krasarang Wilds [Kick] ($Rev: 2722 $)" @line 863]
      [13:57:05.491 D] Activity: Moving to interact with Yi-Mo Longbrow (id: 58376, dist: 64.6, TtB: 49s)
      [13:57:05.525 D] Inserting Yi-Mo Longbrow [Gossip, Questgiver] into the database!
      [13:57:06.767 D] Activity: Moving to interact with Yi-Mo Longbrow (id: 58376, dist: 44.8, TtB: 48s)
      [13:57:08.081 D] Activity: Moving to interact with Yi-Mo Longbrow (id: 58376, dist: 24.6, TtB: 47s)
      [13:57:09.948 D] [Lua.Events] Attached to event UNIT_SPELLCAST_FAILED with handler HandleInterrupted
      [13:57:09.963 D] [Lua.Events] Attached to event UNIT_SPELLCAST_INTERRUPTED with handler HandleInterrupted
      [13:57:09.963 D] [InteractWith-v719(debug)] Interacting with 'Yi-Mo Longbrow'
      [13:57:09.963 D] InteractDebug:631174756
      [13:57:09.969 D] Interact Done:631174756
      [13:57:10.682 D] [InteractWith-v719(debug)] Interact with 'Yi-Mo Longbrow' succeeded.
      [13:57:10.682 V] Blacklisting F130E40800003011 for 00:00:30 [Type: Interact]
      [13:57:11.011 D] [QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
      [13:57:11.011 D] Removed hook [Combat_Main] b1f5af3c-91ab-41b5-9aa0-eef47cb94efc
      [13:57:11.011 D] Removed hook [Combat_Only] 0cc98675-6b73-455a-9dcb-f14607814e23
      [13:57:11.011 D] Removed hook [Death_Main] 11534924-ece8-493a-bdef-801e60a69af8
      [13:57:11.011 D] Removed hook [Questbot_Main] 47d105d4-56fc-4187-bd8d-91f71c9a4a1c
      [13:57:11.249 N] [Singular] attention: Pull Distance set to 25 yds by Questing, Plug-in, Profile, or User 
      [13:57:11.869 D] [QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedWhile.
      [13:57:11.870 D] [QDBG] Starting behavior [ForcedQuestTurnIn QuestId: 30080, QuestName: Finding Yi-Mo].
      [13:57:11.870 D] Goal: Turning in Quest - Finding Yi-Mo : QuestID - 30080 : To - Yi-Mo Longbrow : ID - 58376
      [13:57:11.871 D] Changed POI to: Type: QuestTurnIn
      [13:57:12.155 D] Stop and dismount...
      [13:58:16.290 D] Updating repair cost for current equipped items. New value: [1g34s76c]
      [14:08:12.949 N] [Singular] Casting Soulstone on Me @ 100.0%
      [14:08:12.952 D] [CGSpellBook::CastSpell] Override ID: 20707, KnownIndex: 66
      [14:08:16.215 D] [Singular-DEBUG] Spell.Cast("Soulstone"): cast has ended
      [14:10:17.169 D] Updating repair cost for current equipped items. New value: [1g34s76c]
      [14:11:21.531 D] InteractDebug:631174756
      [14:11:21.546 D] Interact Done:631174756
      [14:11:23.676 D] Cleared POI - Reason Quest Completed
      [14:11:23.676 D] Cleared POI
      [14:11:23.937 D] [QDBG] Done with forced behavior [ForcedQuestTurnIn QuestId: 30080, QuestName: Finding Yi-Mo].
      [14:11:23.937 D] [QDBG] Starting behavior [ForcedQuestPickUp QuestId: 30082, QuestName: Cheer Up, Yi-Mo].
      [14:11:23.949 D] Goal: Picking Up Quest - Cheer Up, Yi-Mo : QuestID - 30082 : To - Yi-Mo Longbrow : ID - 58376
      [14:11:24.280 D] Changed POI to: Type: QuestPickUp
      [14:11:25.209 D] InteractDebug:631174756
      [14:11:25.215 D] Interact Done:631174756
      [14:11:27.408 D] [QDBG] Done with forced behavior [ForcedQuestPickUp QuestId: 30082, QuestName: Cheer Up, Yi-Mo].
      [14:11:27.408 D] [QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedIf.
      [14:11:27.408 D] Compiling expression '((HasQuest(30082)) && (!IsQuestCompleted(30082)))' @ line 867
      [14:11:27.658 D] [QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
      [14:11:27.659 D] [QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
      [14:11:27.659 D] [QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedWhile.
      [14:11:27.659 D] Compiling expression '!IsQuestCompleted(30082)' @ line 869
      [14:11:27.879 D] [QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
      [14:11:27.880 D] Goal: InteractWith-v719: "In Progress (no associated quest)"
      Interacting with Yi-Mo Longbrow
      
      I'm not totally sure why it's not moving and completing the quest. I appears to be getting past the while loop.

      Perhaps "[13:57:10.682 V] Blacklisting F130E40800003011 for 00:00:30 [Type: Interact]" is of note?

      Or perhaps a "WaitTime" of some seconds on the initial InteractWith might help?

      Am happy to modify profile and test out on my next toon though here, just not sure what modifications to make :)

      Hope this helps.
       
    18. vendettas

      vendettas Member

      Joined:
      Jun 19, 2013
      Messages:
      231
      Likes Received:
      12
      Trophy Points:
      18
      Hey guys,

      Is there any plan for this profile pack to be loaded into a single plugin such as cava's or brodie's? Doing so would ensure updates are done automatically and that things are installed correctly (barring any plugin update issues). Also, it saves us from downloading tortoise.
       
    19. azidtrip

      azidtrip Member

      Joined:
      Mar 3, 2012
      Messages:
      215
      Likes Received:
      0
      Trophy Points:
      16
      Please add avoid for Tagar Spinebreaker while doing the starting quests in Hellfire ([Fly][A - Quest] BC 58-70 [Kick]). Would also be nice with avoid for Fel Reaver, it killed me as well while providing log for this post. :p. Wow, and funny enough on top of this Honorbuddy crashed while copying log while it was running (not move but copy). This got alot more than I planned to report in the first place. Hope log will help to fix things. ;) View attachment 6072 2013-09-23 04.39.txt

      EDIT: I see that Fel Reaver is beeing avoided already according to log, but this doesn't seem to work while in combat already. Result dies.., would been better to get regular mob adds than getting annihilated by Fel Reaver as most classes can handle that anyways.
       
    20. azidtrip

      azidtrip Member

      Joined:
      Mar 3, 2012
      Messages:
      215
      Likes Received:
      0
      Trophy Points:
      16
      Another error while doing quest Disrupting Their Reinforcements in Hellfire ([Fly][A - Quest] BC 58-70 [Kick]). Profile kept trying to use portal to close it but didn't manage to do on its own. had to help bot. Good I was not AFK a.t.m. :O

      Status: 2
      [03:27:36.243 D] Cleared POI - Reason Waiting for loot flag
      [03:27:36.243 D] Cleared POI
      [03:27:38.042 D] [QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedMoveTo.
      [03:27:38.042 D] [QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedMoveTo.
      [03:27:38.042 D] Goal: Moving to <-418.1776, 1861.961, 85.3735>
      [03:27:40.109 D] [QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedMoveTo.
      [03:27:40.112 D] [QDBG] Starting behavior [ForcedQuestObjective Objective: [UseGameObjectObjective GameObjectId: 184414, Count: 1]].
      [03:27:40.113 D] Goal: Goal: Use Portal Grimh x 1
      [03:27:40.163 D] Activity: Using Portal Grimh for quest Disrupt Their Reinforcements.
      [03:27:40.164 D] InteractDebug:465433452
      [03:27:40.182 D] Interact Done:465433452
      [03:27:41.702 D] Cleared POI - Reason Successfully interacted
      [03:27:41.702 D] Cleared POI
      [03:27:43.407 D] Cleared POI - Reason Successfully interacted
      [03:27:43.407 D] Cleared POI
      [03:27:43.629 D] InteractDebug:465433452
      [03:27:43.646 D] Interact Done:465433452
      [03:27:45.231 D] Cleared POI - Reason Successfully interacted
      [03:27:45.231 D] Cleared POI
      [03:27:46.971 D] Cleared POI - Reason Successfully interacted
      [03:27:46.971 D] Cleared POI
      [03:27:47.175 D] InteractDebug:465433452
      [03:27:47.192 D] Interact Done:465433452
      [03:27:48.764 D] Cleared POI - Reason Successfully interacted
      [03:27:48.764 D] Cleared POI
      [03:27:50.549 D] Cleared POI - Reason Successfully interacted
      [03:27:50.549 D] Cleared POI
      [03:27:50.778 D] InteractDebug:465433452
      [03:27:50.798 D] Interact Done:465433452
      [03:27:52.400 D] Cleared POI - Reason Successfully interacted
      [03:27:52.400 D] Cleared POI
      [03:27:54.248 D] Cleared POI - Reason Successfully interacted
      [03:27:54.248 D] Cleared POI
      [03:27:54.516 D] InteractDebug:465433452
      [03:27:54.534 D] Interact Done:465433452
      [03:27:56.075 D] Cleared POI - Reason Successfully interacted
      [03:27:56.075 D] Cleared POI
      [03:27:57.879 D] Cleared POI - Reason Successfully interacted
      [03:27:57.879 D] Cleared POI
      [03:27:58.127 D] InteractDebug:465433452
      [03:27:58.145 D] Interact Done:465433452
      [03:27:59.792 D] Cleared POI - Reason Successfully interacted
      [03:27:59.792 D] Cleared POI
      [03:28:01.577 D] Cleared POI - Reason Successfully interacted
      [03:28:01.577 D] Cleared POI
      [03:28:01.818 D] InteractDebug:465433452
      [03:28:01.826 D] Interact Done:465433452
      [03:28:03.411 D] Cleared POI - Reason Successfully interacted
      [03:28:03.411 D] Cleared POI
      [03:28:05.205 D] Cleared POI - Reason Successfully interacted
      [03:28:05.205 D] Cleared POI
      [03:28:05.464 D] InteractDebug:465433452
      [03:28:05.483 D] Interact Done:465433452
      [03:28:07.054 D] Cleared POI - Reason Successfully interacted
      [03:28:07.054 D] Cleared POI
      [03:28:08.865 D] Cleared POI - Reason Successfully interacted
      [03:28:08.865 D] Cleared POI
      [03:28:09.106 D] InteractDebug:465433452
      [03:28:09.123 D] Interact Done:465433452
      [03:28:10.677 D] Cleared POI - Reason Successfully interacted
      [03:28:10.677 D] Cleared POI
      [03:28:12.489 D] Cleared POI - Reason Successfully interacted
      [03:28:12.489 D] Cleared POI
      [03:28:12.728 D] InteractDebug:465433452
      [03:28:12.745 D] Interact Done:465433452
      [03:28:14.305 D] Cleared POI - Reason Successfully interacted
      [03:28:14.305 D] Cleared POI
      [03:28:16.056 D] Cleared POI - Reason Successfully interacted
      [03:28:16.056 D] Cleared POI
      [03:28:16.267 D] InteractDebug:465433452
      [03:28:16.284 D] Interact Done:465433452
      [03:28:17.878 D] Cleared POI - Reason Successfully interacted
      [03:28:17.878 D] Cleared POI
      [03:28:19.677 D] Cleared POI - Reason Successfully interacted
      [03:28:19.677 D] Cleared POI
      [03:28:19.909 D] InteractDebug:465433452
      [03:28:19.925 D] Interact Done:465433452
      [03:28:21.527 D] Cleared POI - Reason Successfully interacted
      [03:28:21.527 D] Cleared POI
      [03:28:23.339 D] Cleared POI - Reason Successfully interacted
      [03:28:23.339 D] Cleared POI
      [03:28:23.555 D] InteractDebug:465433452
      [03:28:23.571 D] Interact Done:465433452
      [03:28:25.179 D] Cleared POI - Reason Successfully interacted
      [03:28:25.179 D] Cleared POI
      [03:28:25.520 D] System.ApplicationException: Cannot run Tick before running Start first!
      at Styx.TreeSharp.Composite.Tick(Object context)
      at Styx.CommonBot.TreeRoot.()
      [03:28:25.495 N] Stopping the bot!
      [03:28:25.495 D] Stop called!
      [03:28:25.496 Q] Bot Stopped! Reason: User pressed the stop button
      [03:28:25.502 D] Behavior flags changed! All -> All
      [03:28:25.510 D] Activity: Honorbuddy Stopped
      [03:28:25.520 N] [Singular] attention: Pull Distance set to 45 yds by Questing, Plug-in, Profile, or User
      [03:28:25.520 D] System.ApplicationException: Cannot run Tick before running Start first!
      at Styx.TreeSharp.Composite.Tick(Object context)
      at Styx.CommonBot.TreeRoot.()
      [03:28:25.522 D] Cleared POI - Reason Exception in Root.Tick()
      [03:28:25.522 D] Cleared POI
       

    Share This Page